Geoff Swilks, Charlie Rudd and Henry Raymond

The Foundry industry in Uralla from early 1980s to 2000

Transcript

Machine draft Unreviewed Deepgram nova-2 output. Speakers are automatically assigned and may need checking against the recording.

  1. 0:01 Geoff Swilks

    I'm Henry Raymond, and I'm now living in Armidale,

  2. 0:05

    but I've been involved with Phoenix Foundry since about 1983.

  3. 0:12 Charlie Rudd

    Yeah. I'm Geoff Swilks.

  4. 0:15

    I'm the owner Raymond,

  5. 0:16

    along with my wife, Carol.

  6. 0:19

    We own GC Foundry,

  7. 0:22

    which is set up on our farm at Shenandoah, which is, 20 k's west of Uralla. Raymond,

  8. 0:29

    we're,

  9. 0:30

    basically,

  10. 0:32

    a bit different to Phoenix. We're an iron and steel foundry.

  11. 0:35

    And, we also got

  12. 0:38

    another company,

  13. 0:39

    GC Agriculture,

  14. 0:41

    where we where we manufacture farming equipment,

  15. 0:45

    plows, farmers, mainly for farmers, spraying equipment,

  16. 0:49

    etcetera like that.

  17. 0:52 Henry Raymond

    That's good, Jeff. My name's Charlie Rudd. I work at

  18. 0:56

    Phoenix Foundry. I live in Yooralla. I've been at the foundry about thirty odd years.

  19. 1:02

    Today we're going to talk about the,

  20. 1:05

    probably called the resurrection of the foundry industry in Yooralla

  21. 1:09

    from about '19... Early nineteen eighties.

  22. 1:12

    There had been one

  23. 1:14

    for about a hundred years prior to that, but it was pretty moribund by that time. Bundarra,

  24. 1:20

    both JNC foundry and Phoenix foundry started about the same

  25. 1:26

    same time within a couple of years of each other. And they both have grown since then, and, it's quite an interesting story, I think. So,

  26. 1:33

    maybe, Henry, you could tell us about your first involvement in it.

  27. 1:38 Geoff Swilks

    Yes. Well,

  28. 1:39

    in the, early

  29. 1:41

    nineteen eighties, I was Arding,

  30. 1:44

    living near Parramatta. And,

  31. 1:47

    I was getting a bit

  32. 1:49

    a bit fed up with city life with all

  33. 1:52

    the all the increasing traffic and,

  34. 1:57

    the smog and getting around and that sort of thing.

  35. 2:00

    So,

  36. 2:03

    I,

  37. 2:05

    I was sort of thinking...

  38. 2:06

    The rest of my family were thinking also that we'd like

  39. 2:10

    to, like to get out of Sydney and

  40. 2:13

    get out back into the country again where

  41. 2:16

    both

  42. 2:17

    myself and my wife grew up originally.

  43. 2:20

    So,

  44. 2:22

    Charlie,

  45. 2:23

    Charlie Rudd, who happens to be my brother-in-law,

  46. 2:27

    suggested that maybe,

  47. 2:29

    there might be some

  48. 2:31

    might be some some future in,

  49. 2:33

    starting up

  50. 2:35

    a bronze foundry in Uralla

  51. 2:37

    to make,

  52. 2:39

    make plaques

  53. 2:40

    for memorials and

  54. 2:43

    building openings and that sort of thing. So

  55. 2:46

    we took the took the plunge

  56. 2:48

    and came up to your eye,

  57. 2:50

    and that's where it all began.

  58. 2:54 Henry Raymond

    Yeah. That's right. In about twelve months after we started, we actually made one plot. I thought it was quite

  59. 3:00

    a flick.

  60. 3:01 Geoff Swilks

    Yes. That's that's right. We we, you know, our our sales for the year was one plaque. Yeah. Now we make about

  61. 3:09 Henry Raymond

    2,000

  62. 3:10

    a year.

  63. 3:13 Geoff Swilks

    Yes.

  64. 3:14

    But in the early days, it was,

  65. 3:17

    we really thought that making plaques should be pretty easy.

  66. 3:22

    The,

  67. 3:24

    we've got a friend that lives in your area now Swilks,

  68. 3:28

    Neil Cooper, who,

  69. 3:29

    who was selling some plaques

  70. 3:31

    at that time. And,

  71. 3:34

    he,

  72. 3:35

    he was the one that really... He was one of the ones that

  73. 3:39

    thought that might be a good idea. And,

  74. 3:43

    somehow or other, we all got got involved. It was about four of us at that stage. Wasn't there, Charles? Peter Wright had,

  75. 3:51 Henry Raymond

    they,

  76. 3:53

    had sold the old foundry, and, they were gonna bulldoze it. And,

  77. 3:57

    Peter Wright bought it to save it, but he wasn't really able to do anything there. He didn't know much about it.

  78. 4:03

    And we came along with this idea to, you know, probably was Neil Cooper's.

  79. 4:07

    He used to run a funeral director's business

  80. 4:11

    And,

  81. 4:12

    used to have a lot of trouble. There's only one bronze plaque manufacturer in Australia at the time. It was down in Melbourne. And,

  82. 4:18

    they used to give rotten sort of service

  83. 4:20

    that single providers usually do.

  84. 4:23

    And,

  85. 4:24

    we...

  86. 4:26

    After we spent twelve months making our first plaque, we,

  87. 4:29

    started to grow pretty rapidly after that.

  88. 4:32 Charlie Rudd

    Yes. It's truly a success story with Phoenix. That's for sure.

  89. 4:36 Geoff Swilks

    But one of the things I remember when we were sort of really trying to

  90. 4:42

    trying to make plaques and get over the,

  91. 4:45

    few problems we're having in the early stages.

  92. 4:50

    This guy that's... Happens to be sitting on my left now, Jeff Swilks,

  93. 4:54

    he came in and he said,

  94. 4:57

    he he had these old steam engines Raymond,

  95. 5:01

    Jeff will be able to tell us

  96. 5:03

    the proper name for these,

  97. 5:05

    these bits of machinery. But he he wanted to see whether we could help him cast a,

  98. 5:10

    some

  99. 5:12

    some part for his Oh, mainly. Remaining

  100. 5:14

    bronze bearings and Yeah. And all sorts of bits and pieces. I remember we thought this is all

  101. 5:20

    this is all a bit of a nuisance. We didn't get... Wanna get involved in this sort of stuff. We we, wanted to get on with our own work, but this fella kept kept kept,

  102. 5:29

    irritating us and... Yeah. He's a persistent fucker, but anyway. So we've had a bit of a,

  103. 5:35

    got a bit... Had a bit of a connection there over the years.

  104. 5:38 Charlie Rudd

    Yeah. No. It's been a really good connection. We've, even though we're, in completely different,

  105. 5:43

    completely different circumstances, working under completely different metals.

  106. 5:49

    I think then at that stage,

  107. 5:51

    I might have got the idea Raymond,

  108. 5:53

    and we put in a little gas furnace ourselves.

  109. 5:56

    And that was a total disaster, melting down old taps Raymond putting beer bottles into use as flux and all that sort of stuff. But,

  110. 6:05

    yeah. I can remember the... Basically, the first couple of bits and pieces that that Phoenix made. They were sitting on the windowsill of the old

  111. 6:11

    foundry there, and, it was a bit of a disaster, but

  112. 6:16

    no different to our own story, of course.

  113. 6:19

    When we started,

  114. 6:22

    restoring steam engines,

  115. 6:24

    back in the nineteen seventies, we couldn't get parts for them. So,

  116. 6:28

    we then decided we needed not only bronze parts, but we needed cast iron bits. So,

  117. 6:34

    so we sold it... Set about,

  118. 6:37

    in the mid eighties,

  119. 6:39

    to build a...

  120. 6:40

    What they call a 24 inch size cupola

  121. 6:43

    for Arding cast iron. And,

  122. 6:47

    and much to our amazement, we collected some old pipes and, whatever Thunderbolt this 24 inch diameter cupola. And

  123. 6:55

    and the thing actually,

  124. 6:56

    runs on coke and air and a bit of limestone.

  125. 7:01

    And the thing actually worked, and it worked so well that it melted two tonne an hour.

  126. 7:06

    So,

  127. 7:08

    so then we got,

  128. 7:09

    basically got involved,

  129. 7:12

    with a water

  130. 7:13

    manufacture... Water mob Raymond, started making water valves, boxes, and things for them.

  131. 7:20

    But that was sort of short lived, in the fact that we weren't satisfied

  132. 7:25

    with with just doing cast iron. We wanted to melt

  133. 7:28

    steel as well.

  134. 7:29

    And you can't do that in Cupola because of the carbon content in the coke, etcetera. So we looked around and got ourselves,

  135. 7:38

    some induction

  136. 7:39

    furnaces that were third hand.

  137. 7:43

    Built those, installed them, and they're still working to this day, actually. So it's a credit to the inductor firm, the company in Melbourne that manufacture that gear.

  138. 7:54

    And all of a Rudd, we realized that two forty volt power we had on the farm

  139. 7:58

    wasn't gonna run these damn things. So we,

  140. 8:02

    set about and bought an old secondhand generator, which done the job for a little while until we got onto a bit bigger one that ran them at full capacity.

  141. 8:10

    And,

  142. 8:12

    the steel foundry has,

  143. 8:14

    forged ahead from there. But,

  144. 8:17 Henry Raymond

    so I'll let Charlie have a bit of a say now. Yeah. It's interesting you're talking about using broken glass as a flux. One of my early jobs in the family was emptying the bottles. We thought that we could use them. They run around pinching beer bottles off everybody. No. I used to empty them.

  145. 8:30 Geoff Swilks

    Yeah.

  146. 8:31

    I know Charlie found that a bit of

  147. 8:33

    task.

  148. 8:34 Henry Raymond

    But he he sort of got used to it after a while. He got used to it. He must have bought the foundry for a long time. Right. Until we realized it's a lot cheaper and easy to buy it. But, Yeah. Well, I must admit the first couple of bits of bronze we poured were pretty disastrous.

  149. 8:48 Charlie Rudd

    So... But,

  150. 8:50

    yeah. No. It's it's a it's a very interesting,

  151. 8:54

    game, the foundry game.

  152. 8:56

    Unfortunately,

  153. 8:57

    these days,

  154. 8:59

    a lot a lot of foundries are closing down.

  155. 9:02

    Let's do the iron and steel foundries,

  156. 9:07

    which is very unfortunate,

  157. 9:08

    I think, for the sake of,

  158. 9:11

    the well-being of our lovely country that we live in. But,

  159. 9:16

    as a result of that, of course,

  160. 9:18

    it's been beneficial

  161. 9:21

    to to GNC Foundry in the respects that,

  162. 9:24

    we are picking up a lot of work

  163. 9:27

    from these foundry closures.

  164. 9:29

    Mhmm. And,

  165. 9:32

    of course we're a fully accredited ISO

  166. 9:35

    company these days,

  167. 9:37

    which is,

  168. 9:38

    in the... When we were doing it people were saying it's not worth the paper it's written on, but it certainly is as far as we're concerned.

  169. 9:46

    Because we're getting more involved in government type projects, especially rail,

  170. 9:50

    where you've gotta have that accreditation. Raymond,

  171. 9:56

    so,

  172. 9:57

    yeah, we're, very pleased the way it's Arding. But,

  173. 10:03 Henry Raymond

    yeah. Well, you know, it's,

  174. 10:06

    I suppose we had a pretty much parallel sort of,

  175. 10:10

    career there. We,

  176. 10:12

    started off small. I think we sold our first plaque to Gowera Council or something. First cemetery plaque.

  177. 10:18

    And the first plaque went down, I

  178. 10:21

    think, to... Yeah. I think so. Yeah. Yeah. And we've, we've got that back from them. We made them a new one. We bought it back at a paid expense.

  179. 10:29

    We made them a new one because the other one had a big blow on the back they didn't know about.

  180. 10:35 Charlie Rudd

    That's casting. Yeah. Yeah. And that takes me a black art.

  181. 10:39

    Casting all that out about it. It can be silent along enjoying life and doing everything right and next thing for no reason or another.

  182. 10:47

    Mhmm. But then he's got a hole in it or it didn't run properly or it's... Yeah.

  183. 10:52 Geoff Swilks

    Yeah. But we did did did have a pretty jagged career in the early stages, didn't we? It was really,

  184. 10:58

    sort of getting things together was,

  185. 11:01

    quite a problem. And,

  186. 11:03

    making patterns, that was

  187. 11:05

    that... That's the thing about making plaques because you've got to have a different

  188. 11:09

    pattern for every plaque. It's not like

  189. 11:12

    I'm not like us. Yeah. Not like the GNC family here. I mean, they make up one pattern and that they're right for hundreds of car stickers.

  190. 11:20

    Yeah. So here we are sort of trying to learn how to, first of all, we had to make,

  191. 11:26

    make make the letters to, or come up with the letters to to put on the, plaques to, to make the patterns, put put on the, put on a plate to make the patterns, which,

  192. 11:37

    which turned out to be

  193. 11:39

    a a bit of a, challenge in itself, but,

  194. 11:42

    that eventually got going. And, Raymond,

  195. 11:47

    and then we had to,

  196. 11:49

    learn how to,

  197. 11:51

    how to stick the,

  198. 11:54

    letters on the on the plates in a reasonably efficient way. And,

  199. 11:59

    I think I remember, Charlie, you you used to get pretty involved in this with

  200. 12:03

    with, working out how to,

  201. 12:06

    how to,

  202. 12:07

    sort of offset the,

  203. 12:10

    offset the,

  204. 12:11

    the lettering onto the plat... Plaque and so on. Yeah. We used to,

  205. 12:16 Henry Raymond

    we bought our first computer. It was a Mac plus.

  206. 12:20

    And, we had an old, dot matrix printer that we used

  207. 12:24

    to run through with the paper back to Rudd. Then we used to photocopy that,

  208. 12:29

    then we used

  209. 12:30

    to iron that onto a bit of aluminum. The photocopy

  210. 12:33

    ink used to come off on the aluminum right right way up, and we hide all those girls, those Swilks girls, and they used to glue letters in the River so you could set this thing out on,

  211. 12:43

    first version of,

  212. 12:45

    Pagemaker.

  213. 12:46

    It's,

  214. 12:48

    programs owned by Adobe those days, but some other company bought it out. And

  215. 12:52

    Pagemaker one came with one floppy disk,

  216. 12:55

    and

  217. 12:58

    we, put that in our Mac plus and then we, couldn't save things so we had to graduate to a Mac plus with two floppy drives.

  218. 13:05

    Mhmm. It's a great leap forward there.

  219. 13:08

    Mhmm. But we had a shed full of school girls Landcare

  220. 13:12

    used to come and work after Swilks. And,

  221. 13:15

    they, used to... Used to earn good money. Actually, we used to poke them a dollar a line, and they'd earn a $100 Raymond go into sports school and spend $200 and come back begging for word. And, so we had a really good setup

  222. 13:29 Geoff Swilks

    there for a while. Yeah. Yeah. Yes. It's pretty that that process is almost obsolete.

  223. 13:35 Henry Raymond

    Not in America. We're looking some foundries over there. It's about 90%

  224. 13:39 Charlie Rudd

    still Still do as I'm doing. That by here. That's amazing. Yeah. Pretty bad, but

  225. 13:44 Henry Raymond

    it

  226. 13:45 Geoff Swilks

    has

  227. 13:45

    to

  228. 13:46

    get

  229. 13:47

    terrible.

  230. 13:48

    Yeah.

  231. 13:49

    So,

  232. 13:50

    you know, the other thing about the early days, I think, was,

  233. 13:54

    was trying to sell these things. Obviously, if you're making them with,

  234. 13:58

    if if you can't sell them, you're not not getting anywhere. Oh, that's cool.

  235. 14:02

    Here's two blokes that,

  236. 14:05

    were the most unlikely salesman you could imagine,

  237. 14:09

    sort of forgetting in their cars, getting in their Raymond driving up and visiting councils around the place. And we couldn't believe our

  238. 14:17

    our good fortune that, just about everywhere we went, people said, oh, yeah. We'll buy plaques from you. Yeah. We've got really good support.

  239. 14:24 Henry Raymond

    It's sort of handy though. You know, I remember going to Crindall Council and turned out I used to... The health inspector there around the cemetery. I

  240. 14:32

    went to, high school with his sisters, so that was a great help. Yeah. You know, things like that. Right, mate. So they're from... And then Gaira Council, my cousin used to be the blacksmith in Gaira.

  241. 14:42

    And, so that was great in there.

  242. 14:45

    And,

  243. 14:46

    but when we got further out, it got a bit harder. We just run out of relatives Raymond.

  244. 14:51 Geoff Swilks

    But I think the thing that we didn't, you know, there was

  245. 14:55

    there was a lot of luck in what we in what we did, you know, just sort of looking back. And,

  246. 15:00

    one of the one of the big things that was in our favor, there was just one

  247. 15:04

    manufacturer

  248. 15:05

    of plaques, basically, in Australia. And because they had a monopoly, they,

  249. 15:11

    weren't real good on the service. So,

  250. 15:13

    they just sort of,

  251. 15:15

    Rudd plaques when they... When it suited them. And,

  252. 15:19

    so there were all

  253. 15:21

    these councils and other places around the country that,

  254. 15:24

    were only too keen to, find another supplier. But...

  255. 15:28

    So,

  256. 15:30

    even though we had

  257. 15:31

    phenomenal sales growth in our early days,

  258. 15:35

    probably not a lot of that was due to the, expertise of the Salisbury, I don't think. No.

  259. 15:42 Charlie Rudd

    No. You're right. It is a difficult,

  260. 15:45

    process when you,

  261. 15:47

    you know, you can go in and and build your business,

  262. 15:50

    which is a relatively easy, simple type thing in some respects. But marketing, without marketing, you're,

  263. 15:57

    and and it is a big Arding.

  264. 16:00

    I foundry really difficult dieback

  265. 16:04

    in the '80s, well,

  266. 16:06

    more like in the '90s, about '90s, early '90s, after we put electric induction in and started into steel milling,

  267. 16:13

    we found it really difficult to break into the markets because there were a lot of steel foundries Yeah. In Australia. And,

  268. 16:22

    and us being relatively new in the scene, no one knew anything about us,

  269. 16:27

    weren't really that prepared to to put an effort to buy our product.

  270. 16:32

    But persistence is the big thing, and that's what you've gotta do.

  271. 16:37

    Henry

  272. 16:38

    very lucky that,

  273. 16:40

    we've we've got a very close family, with Carol and my wife, and, who's

  274. 16:45

    who's really energetic Raymond,

  275. 16:47

    and push things along. And,

  276. 16:50

    we've got a son, Murray, who who

  277. 16:54

    who manages all our business finance. That's his job. But he did for a while, worked for a few years, worked with the foundry,

  278. 17:02

    with us. And,

  279. 17:04

    River Young and really Energetic got into it.

  280. 17:08

    And a lot of the sales was produced was because of Murray's effort, really.

  281. 17:13

    And,

  282. 17:15

    then we've got another daughter, Vanessa, and she's also put a lot of effort into the into the foundry in the early days, which is great to see.

  283. 17:24

    But like I say, marketing is it. And without marketing and without getting the products

  284. 17:28

    out the door,

  285. 17:30

    it's,

  286. 17:31

    you know, the whole thing is wasted. And sometimes,

  287. 17:34

    it it it it get... Did get really disheartening.

  288. 17:37

    And, you just gotta pick yourself up,

  289. 17:40

    especially when you're quite on jobs,

  290. 17:42

    and, you find you're only winning about 3% of them.

  291. 17:47

    And,

  292. 17:50

    you know, but persistence is it. Getting, getting to know people, getting,

  293. 17:55

    I think,

  294. 17:56

    getting to know people in in certain companies, especially the companies that you purchase your goods from, like your

  295. 18:04

    your resins and your catalysts and, and your and your metals and that type of stuff.

  296. 18:09

    Getting a good relationship with them people is basically

  297. 18:13

    a big start because they they start to push your product,

  298. 18:16

    and that's what we found that they were doing. And,

  299. 18:21

    and things change, of course. Like I say, foundry are shutting down now, and,

  300. 18:28

    and like Phoenix,

  301. 18:29

    we have got a good rapport in the in the game. And,

  302. 18:35

    so work is,

  303. 18:37

    sort of comes in

  304. 18:38

    without,

  305. 18:40

    chasing a lot of it. It just turns up on the doorstep. But,

  306. 18:44

    but still you've got a, we've got a general manager now working in the company.

  307. 18:49

    Chris, he's,

  308. 18:51

    he's been with us now for seven years.

  309. 18:56

    He is still out on the road a lot,

  310. 18:58

    in aeroplanes. He's in Perth one day, on MacKay the next, etcetera, etcetera. And you've gotta do that still.

  311. 19:04

    You've gotta be in the face of people that you're working for and,

  312. 19:09

    to keep that rapport going.

  313. 19:11 Henry Raymond

    Yeah. We've we've find find that. You know, we've got,

  314. 19:15

    fair sales staff. And then we got one in Canada

  315. 19:18

    and three in Australia.

  316. 19:20

    And, it ends up in, New York just leaning there about now.

  317. 19:25

    Talking to people somewhere. All River Canada Raymond Montreal

  318. 19:28

    and Vancouver.

  319. 19:30

    It's,

  320. 19:30

    big part of the business Raymond,

  321. 19:32

    you've really got to do it to, succeed, I think now. Yes.

  322. 19:36 Charlie Rudd

    Yeah. So it's...

  323. 19:38 Geoff Swilks

    Yeah. And... But anyway,

  324. 19:42

    you sort of remember Charlie the time when we made the big decision to, to move out of our,

  325. 19:48

    where we were now.

  326. 19:49 Henry Raymond

    When we're sort of... We used to have a,

  327. 19:52

    Arding edges of plats and an old

  328. 19:54

    cutter grinder for shearing. We had it in the lath, and, we used to blow the bronze dust out in the street.

  329. 20:00

    And the work River black walked in, and that was really the end of the

  330. 20:05

    whole place.

  331. 20:06

    So we we had to move after that.

  332. 20:10

    Also, I remember we used to have a lot of trouble getting sand. We... It was very primitive, the old foundry,

  333. 20:15

    and we had a River Raymond.

  334. 20:17

    And we used to get a light of that from Newcastle and get in there somehow, and then all the local cats used to use it at night. You have to filter this out before you put in the sand mixer.

  335. 20:29 Geoff Swilks

    Yeah. Yeah.

  336. 20:30

    So

  337. 20:32

    that was a bit of a bit of an issue, wasn't it? Because, I remember when my young... Youngest daughter used to come up and,

  338. 20:38

    when she was about three,

  339. 20:41

    playing the, playing the... This fantastic sandpit, you know. It was just so big. Yeah. But but, of course, you know, the cats made it a little bit,

  340. 20:49

    a bit dicey, but, I don't think her mother fed out a bit.

  341. 20:54 Charlie Rudd

    That's it.

  342. 20:56 Geoff Swilks

    Yeah. But we did sort of have some terrible...

  343. 20:59

    When you think about, you know, the way we used to handle sand in the early days, I mean, we're just so...

  344. 21:05

    We've just undercapitalized

  345. 21:06

    to such an extent that we just had to do things the really the hard way. We sort of... Remember we had this woman, she's a big bed wider than she was high.

  346. 21:16 Henry Raymond

    And better there, she used to shovel sand and load sand and carve the house around and,

  347. 21:21

    complain about being sick one day.

  348. 21:24

    And, freaking the sandbinder was making us sick and,

  349. 21:27

    so we sent her down to the doctor and,

  350. 21:31

    came back and resigned.

  351. 21:33

    Two weeks later, she had a baby. She didn't know she's had a baby.

  352. 21:36

    Oh, really? We've been sending her up letters, didn't we? Oh, yeah.

  353. 21:41 Charlie Rudd

    Well, here you go. Yeah. We don't treat our people like that. Yeah.

  354. 21:49 Henry Raymond

    Yeah. Well... Well, Geoff, you wanna tell us about how you learned about the treating and so on and... Yeah. We've,

  355. 21:55 Charlie Rudd

    we've,

  356. 21:57

    not only do we do steel castings, well, we do. I mean, not only do we do the do the Arding of it, of course,

  357. 22:03

    we also we also got an in house,

  358. 22:07

    heat treatment. We do all our own steel

  359. 22:09

    heat treating furnaces,

  360. 22:12

    which saves us heaps and heaps of time.

  361. 22:15

    And,

  362. 22:17

    we also,

  363. 22:18

    of course, got spectrometer,

  364. 22:20

    which,

  365. 22:21

    every every

  366. 22:23

    furnace of metal that we pour, it doesn't matter whether it's cast iron or what. Everything goes through the spectrometer to get the correct analysis, and that's what you've gotta do, of course, because,

  367. 22:33

    there are just so many different types of... And grades of metals. Raymond,

  368. 22:39

    like, you know, if you're building a part for the undercarriage of

  369. 22:43

    a of a diesel loco that, being built by big manufacturing companies,

  370. 22:48

    which we're dealing with now, or,

  371. 22:51

    or undercarriage components for the XPT or,

  372. 22:55

    axle boxes for trains Raymond,

  373. 22:57

    or even exhaust manifolds

  374. 23:00

    or diesel locos,

  375. 23:01

    that type of work.

  376. 23:03

    Or mining equipment, we do, a lot of work for drag lines in the mines. They've all got different metal formulas Raymond

  377. 23:11

    and different specifications

  378. 23:12

    and different hardnesses that these

  379. 23:14

    things have gotta be taken to.

  380. 23:18

    So,

  381. 23:19

    so all these metals that we melt,

  382. 23:21

    have gotta go through a spectrometer and come out with that,

  383. 23:25

    with that with that grade of material

  384. 23:28

    that that particular company is looking for for that particular casting.

  385. 23:33

    So then, you know, to get it,

  386. 23:35

    to get that, especially, steel,

  387. 23:39

    sorted out Raymond, so it doesn't break and Rocky, then it's gotta go through the

  388. 23:43

    through a heat treatment process.

  389. 23:45

    And,

  390. 23:47

    and, tempering system then to get the right Rudd hardnesses

  391. 23:51

    and elongations,

  392. 23:53

    which sometimes,

  393. 23:55

    you know, you've gotta do an odd trial or two to get that correct,

  394. 23:59

    different temperatures Raymond etcetera etcetera.

  395. 24:01

    But I must say we have got some,

  396. 24:04

    good metallurgists

  397. 24:06

    on-site

  398. 24:06

    out who,

  399. 24:08

    who specialize in doing this, and

  400. 24:11

    and they, give us a lot of advice

  401. 24:14

    at times.

  402. 24:15

    But most times we've been very fortunate,

  403. 24:19

    because none of us have ever had any foundry experience before like, like, Henry and Charlie.

  404. 24:26

    We, it's stuff that you pick up along the way, and, we've been, very reluctant over the years

  405. 24:33

    to employ anyone that's been working in a foundry. We prefer to get guys off the street, so to speak,

  406. 24:39

    and, train them into what, what we've learned how to do things.

  407. 24:44

    And I think that, that's worked really successful for us.

  408. 24:50

    And then, of course, we've,

  409. 24:53

    gotta do our own mag particle testing Raymond,

  410. 24:57

    Bernal hardness testers. Raymond,

  411. 25:01

    so we're we're pretty fortunate in that area, but a lot of the... Most of this rail stuff has gotta be x Rudd. So that's, of course, gotta be sent away

  412. 25:10

    to,

  413. 25:11

    special EDR,

  414. 25:13

    EDR

  415. 25:13

    people to do that.

  416. 25:17

    And, and that's a good thing as far as we're concerned because,

  417. 25:22

    at least a component that goes

  418. 25:24

    into a train or a sector like that

  419. 25:27

    that we we want,

  420. 25:29

    we need it perfect,

  421. 25:30

    that comes away from them with a written report, which takes a lot of anus off us

  422. 25:36

    if there are any future failures, which we obviously hope there River is.

  423. 25:42

    But,

  424. 25:43

    as well as train

  425. 25:45

    or rail component,

  426. 25:48

    we we also do, most of the,

  427. 25:52

    what they call lock boxes,

  428. 25:54

    which fit on the signal boxes on New South Wales rail.

  429. 25:58

    We do, they they fit on the lines.

  430. 26:02

    And now we're,

  431. 26:05

    about to start on,

  432. 26:07

    on doing that same job for all of Queensland. So, that's pretty exciting.

  433. 26:12 Henry Raymond

    Yes.

  434. 26:13

    Some really good things, those spectrometers, those

  435. 26:17

    We're a bit spoiled. We're just buying it from the, suppliers, and we can get to spend any recipe we want so we don't have to do any of that. No. No. No. I was reading a book the other day about the, Bessemer steel process, and

  436. 26:30

    the early trouble with it was it was too fast. They could do a charge in twenty minutes, and they didn't ever... Couldn't ever do the chemical tests in time. And you see a lot of failures and bad batches, and the spectrometers Charlie all that you can do so quickly, and you can just do it while Swilks melt them.

  437. 26:46 Charlie Rudd

    Yeah.

  438. 26:47

    Arding pieces of gear Raymond,

  439. 26:49

    we... We've also got an ultrasonic tester as well, which we can,

  440. 26:55

    we... A lot of this stuff, we... Before we send it away for X-ray, we we put the ultrasonic over it just to make

  441. 27:01

    sure that, we can't pick up any defects in it,

  442. 27:05

    before it goes away because, obviously, these,

  443. 27:08

    radiologists, if you want a... For want of a better word, to check this metal, They don't do it for nothing.

  444. 27:14

    No. So,

  445. 27:16

    so we check that.

  446. 27:20

    It's,

  447. 27:20

    it's been interesting. We've now got about 10 people, 10, 11 people employed,

  448. 27:27

    on on a permanent basis.

  449. 27:29

    And,

  450. 27:32

    we're still running generators

  451. 27:35

    for, to run our business because we haven't got access to three phase power.

  452. 27:41

    We've just purchased a new generator. It's,

  453. 27:44

    the old one was 680

  454. 27:46

    horsepower, the new one's 830.

  455. 27:49

    River us a bit more oomph and a bit more power.

  456. 27:53

    We find that,

  457. 27:54

    diesel prices,

  458. 27:56

    as compared to probably buying in power these days to run induction Arding

  459. 28:00

    is probably not too much difference.

  460. 28:04

    And,

  461. 28:06

    Phoenix also got an induction furnace.

  462. 28:08 Henry Raymond

    Yeah. I've had that for a few years now. It's been

  463. 28:11

    a great thing that it's a,

  464. 28:13

    it's a gold melder.

  465. 28:14

    It's... Works a lot higher frequency than yours. Mhmm. That's right. So that you don't have oxidized the, metal and wear the crucible out. Yeah. So... No. It's been a great

  466. 28:25

    Yeah. That thing. We,

  467. 28:28

    we've got that running. We've got a system of,

  468. 28:30

    plunge pouring and stacked molding. We can cast about six plaques at once.

  469. 28:35

    And, we recycle molten metal back out of the runner system, back into the crucible.

  470. 28:41

    And, it saves a lot of fiddling Raymond, saves a lot of energy and smell and fumes and

  471. 28:47

    sounds. That's,

  472. 28:48

    improving.

  473. 28:50 Charlie Rudd

    Innovation is everything, ain't it? Yeah. And, looking at a project, looking at what the ways easier systems, easier Yeah. More modern systems to do it. All of this stuff you can't afford to buy it, so you manufacture it. That's true. Put it into place.

  474. 29:04 Geoff Swilks

    Yeah. There's been a lot of... There has been when you sort of look back over these thirty years, you know, the actual

  475. 29:11

    changes in, the way we've done things is really quite quite significant, isn't it? I mean Oh, yeah. I think,

  476. 29:18

    you know, we've just been talking about

  477. 29:21

    the metal melting and pouring and, that's certainly been pretty significant. But, of course,

  478. 29:26

    the other thing is that's

  479. 29:30 Charlie Rudd

    been,

  480. 29:33 Geoff Swilks

    is so different now to what it was before is the,

  481. 29:36 Henry Raymond

    pattern making and, you know, it's changed utterly. It's, Yeah.

  482. 29:41

    We,

  483. 29:43 Geoff Swilks

    you know, we we did see we did

  484. 29:46

    not long after we moved down

  485. 29:48

    to down to Walker Rudd, we were sort of really struggling to find another way of

  486. 29:54

    preparing the patterns Raymond

  487. 29:56

    we had a

  488. 29:57

    very short lived project of,

  489. 30:00

    of actually

  490. 30:02

    engraving,

  491. 30:03

    engraving

  492. 30:05

    cavities Raymond,

  493. 30:06

    and sort of making

  494. 30:08

    a positive

  495. 30:10

    from the, engraved cavity. But that was really...

  496. 30:14

    We never really

  497. 30:15

    succeeded Thunderbolt

  498. 30:17

    fortunately, this other system, the, photopolymer

  499. 30:21

    system that we're using now,

  500. 30:26

    came Armidale.

  501. 30:27

    And,

  502. 30:29 Henry Raymond

    it's interesting that we'd,

  503. 30:31

    couldn't really work out how the opposition were making them. And,

  504. 30:34

    we just talked to our paint bloke one day, and

  505. 30:38

    I'd heard about this

  506. 30:40

    method of,

  507. 30:41

    making patterns by,

  508. 30:43

    photographically

  509. 30:43

    with gelatin.

  510. 30:45

    There's actually one up in the old cemetery. It's a 100 years old, an old gelatin.

  511. 30:50

    Yeah. That's unwell. I don't know. They would have done it with an oil lamp or put it in the sun or something. Yeah. It was followed the other day. So that's the... They broke a cast... The cast iron

  512. 31:00

    headstone up in the cemetery. Yeah. Right. Okay. So I was working on this and I was trying to get some gelatine.

  513. 31:05

    It was some boron substance that that used to mix up with it that's photosensitive

  514. 31:10

    and,

  515. 31:11

    and you expose it to a negative Raymond then you can get your letters, letter elevation and,

  516. 31:16

    but it's sort of defeating me a bit. I couldn't find out

  517. 31:19

    the stuff to use and we were just talking to our, paint consultant one day and he said, oh, you ought to try photopolymer.

  518. 31:25

    I said, I've never heard of it and, he gave me a number of bloke in Melbourne and I rang him up and he said,

  519. 31:31

    jeez, what a coincidence.

  520. 31:33

    You sold the system to your opposition and, we've had a secrecy agreement and ran out yesterday.

  521. 31:38

    I had to find out.

  522. 31:39

    He was a total fluke and,

  523. 31:41

    so I said, go come and see you. I said, yeah. I'll come and pick up in the plane. He got in the plane the next day and, it really saved our lives at at Machinery.

  524. 31:49

    We just couldn't get enough decent pattern motors, you know,

  525. 31:53

    to do it and, we'd tune out perfect patterns, you know, crude letters or anything like that. Marvels. We're doing a marvelous thing. Yeah. Yeah. It was a it was a great break that.

  526. 32:05 Charlie Rudd

    Okay.

  527. 32:06

    Yeah. That's

  528. 32:08

    incredible. I can... Because I can remember when you guys used to just stick them on a bit of a board.

  529. 32:13 Geoff Swilks

    Yeah. That can be too Henry well. Yeah.

  530. 32:17 Henry Raymond

    So the other Arding is the, we Swilks do a fair bit of pattern marking, you know, making vases and other stuff, symmetries Raymond tooling and River systems

  531. 32:26

    and all this three d

  532. 32:28

    CAD CAM machining. We're pretty heavily into that those days. You know, we

  533. 32:32

    designed it ourselves and cut them out in three d.

  534. 32:35

    I've just bought a four axis machine.

  535. 32:38

    Mhmm. And,

  536. 32:39

    there's some really complex stuff.

  537. 32:41

    And I'm, trying to

  538. 32:44

    get the people to run the place now to buy a water jet, but I'm not getting far with it.

  539. 32:50

    Yeah. Cut stuff out.

  540. 32:52 Geoff Swilks

    Yeah. But it's funny, isn't it? I mean, they

  541. 32:55

    they seem to be less likely to take the plunge

  542. 32:58

    people that are running... That are managing it now than what we were. Yeah. When we sort of look back at those times when we didn't have any money. We decided to lash out and buy this,

  543. 33:07

    plate making machine.

  544. 33:10

    You know, we just... It just cost so much in that at that time. Yeah. That's it. And, we just had to do it.

  545. 33:17 Henry Raymond

    Those days, they could just write a check-in. They don't seem to wanna do it.

  546. 33:22 Charlie Rudd

    Yeah. That's just...

  547. 33:23

    There wasn't much in the checkbox online.

  548. 33:27 Henry Raymond

    But, There wasn't much in those days. And,

  549. 33:29

    that's alright. But,

  550. 33:31

    certainly made a difference. And, you know, we had a few things like that. We've,

  551. 33:35

    put in the sand handling system. That's another big thing. That saved us heaps of

  552. 33:40

    unreliable labor and Yeah. It's much much more productive.

  553. 33:45 Geoff Swilks

    Yeah. Yes. We were a bit bit

  554. 33:47

    reluctant to get on with that, but when we finally did, it really, made a big difference.

  555. 33:52 Charlie Rudd

    It does. And you and you and you find this, hey. You've you've got to...

  556. 33:56

    Like, even even like we say, we we we were all sort of struggling to get a dollar, but,

  557. 34:01

    but you still had to do it,

  558. 34:05

    get get the dollars from somewhere. But it did it did make a big difference in the end, like,

  559. 34:11

    like like putting in induction Arding. I mean, we...

  560. 34:14

    Our foundry would not have been in existence now if

  561. 34:17

    we were still relying on cast iron,

  562. 34:21 Henry Raymond

    out of a cupola. No. It makes a huge difference to you. That man has to. Yeah.

  563. 34:27 Charlie Rudd

    And of course these days, we're,

  564. 34:30

    g and c, we're we're reclaiming all of our sand,

  565. 34:33

    which is... We've been doing now for probably close to eighteen months, and it's a massive success.

  566. 34:39

    It's,

  567. 34:41

    Okay. So how much do you have a... We put, we we use a blend which we put through our mixes.

  568. 34:47

    Mhmm.

  569. 34:48

    We we put in 30% new sand

  570. 34:51

    with, 70%,

  571. 34:53

    reclaimed sand.

  572. 34:55

    Right. But if we got a big mould, we, we we use maybe new sand on the face of that, and then just 100%

  573. 35:03

    of reclaimed to back it up. Right. And it's... It is truly a success that,

  574. 35:10

    instead of buying,

  575. 35:12

    what, up to 50 ton a month of sand, we're... Oh, no more than that. Sorry. Up to 80 ton a month, some months,

  576. 35:18 Henry Raymond

    we're we're back to probably about 22, 23 ton on average a month. Yeah. That's great. Wish we could do that then. We just can't do that. You know, because the shutdown miles are just about... We gotta have new sand. But it's interesting I'm trying to send that new,

  577. 35:33

    synthetic sand we're trying. I showed it. Do I show it to you? Yeah. You said you were gonna have a car. How about that work? Oh, sweet. Well, it's good. It's quite interesting.

  578. 35:41 Charlie Rudd

    It's Swilks an interesting thing with foundry.

  579. 35:45

    It's an old profession, probably not as old as some, but still it's an old one. And, Raymond

  580. 35:51

    it's still sand

  581. 35:52 Henry Raymond

    or casting glass or sand. It wasn't it wasn't originally. The, if you go back to,

  582. 35:58

    eighteenth century in New York, it was done in, Wyoming. It was actually sand sand cast invented in Holland. Mhmm.

  583. 36:04

    About that time, but end of the eighteenth century. It was, prior to that, it was always done

  584. 36:10

    in... Because it went to the Iron Bridge in Shropshire.

  585. 36:13

    You can have a look at all the castings they did. They're full of blowholes and all that sort of stuff. Oh, that's incredible. Raymond,

  586. 36:20 Charlie Rudd

    some of the castings that were done, rather Chinese Raymond that eight years ago, I mean,

  587. 36:25

    there's supposedly a cast on bridge somewhere in China that was...

  588. 36:28

    They may have molded up and built a cuperal alongside of it

  589. 36:33

    to melt and pour it. I mean, that's

  590. 36:36

    in some respects, there's a lot of art that's lost. Yeah. Yeah.

  591. 36:40

    Yeah.

  592. 36:41

    But,

  593. 36:43

    I guess we don't need that. But we've had a good affiliation with Phoenix over the years.

  594. 36:49

    They certainly have. I mean, at at one stage there, we we Rudd doing some Arding and pouring for Phoenix,

  595. 36:55

    and we got got into it, got involved in some really interesting projects like, sir Joseph Banks,

  596. 37:00

    who is now standing in Bankstown Square.

  597. 37:04

    Several dolphins.

  598. 37:06

    I guess The Sandecken Memorials.

  599. 37:09

    Yep. The Anzac

  600. 37:11

    Bridge. Bridge with the rising suns on both sides. That was a really, really interesting project. Huge job, Edwin. Yeah.

  601. 37:19

    Those things are there forever Raymond,

  602. 37:22

    even on,

  603. 37:27

    on one of the islands out there where you cast a plaque for,

  604. 37:31

    for the,

  605. 37:33

    Catalina that crashed on the side of the hill. That's right. Yeah. Yeah. Yeah. And

  606. 37:39

    so,

  607. 37:40

    yeah. So we we... As I say, it's been a really, really good good association.

  608. 37:44 Geoff Swilks

    Yeah. Indeed. It it's been... And Raymond it certainly has been important for

  609. 37:49

    Phoenix. I mean, we did go through one

  610. 37:51

    stretch where we weren't able to, pour

  611. 37:54

    at all where we were and,

  612. 37:58

    you know, I think if you hadn't have been there to, help us out in that in that time, it would have been

  613. 38:04

    extremely difficult. I'm not sure what we would have done. We didn't have any answers at the time anyway. Raymond there was certainly a pleasure doing it. It was a great relationship

  614. 38:13 Charlie Rudd

    that that we had.

  615. 38:14 Geoff Swilks

    Yeah.

  616. 38:15

    Yeah.

  617. 38:19 Henry Raymond

    Yeah. Well, that's...

  618. 38:22 Charlie Rudd

    Yeah. No. That's that's great. And I think we're, you know, we we could we could talk for a lot longer on these subjects. And,

  619. 38:32

    you know, the the more that you talk about it, the the more that seems to come out. It's great. Yeah. Yeah. And, but I still... Like I say, without reiterating, we we certainly value

  620. 38:43

    the friendship and the relationship we've had with Phoenix over the years. And,

  621. 38:50

    in some respects, you've been a great inspiration on G and C. That's for sure.

  622. 38:55 Geoff Swilks

    Yeah. I think it's all been neutral. So... Yeah. Anyway, it's been good to tour. Only thing that's missing is the skurners.

  623. 39:02

    Yeah.

  624. 39:03 Charlie Rudd

    Empty beer bottles.

  625. 39:06

    Well, we don't need beer bottles for milk anymore.

  626. 39:10

    No. And those are over. Yep.

  627. 39:13 Geoff Swilks

    Yeah. Well, I'm afraid so. Never mind.

Back to top